####################### Meta Data Part ############################# Column Name Data Type Description Label Validation Text Unit 1 EXPEDITION Numeric expedition number Expedition expedition number (Int. 1 - 99999), required key field <>0 # 2 SITE Numeric site identifier, max. number between 1 and 9999 Site site identifier (num 4), required key field <>0 # 3 HOLE text hole identifier, A-Z Hole hole identifier (max. 1 chars, A-Z), required key field LIKE ('[A-Z]') # 4 CORE Numeric core identifier Core please enter a number between 1 and 99999 between 1 and 99999 # 5 CORE_TYPE Text type of core, piston, gravity.... Core Type core type(max. 1 char), required field <>'' # 6 TOP_DEPTH Double top depth of core Top Depth top depth (float), required field >=0.0 m 7 DRILLED_LENGTH Double drilled length of the current core run Drilled Length (m) real value >=0.0 >=0.0 m 8 BOTTOM_DEPTH Double bottom depth of core Bottom Depth bottom depth (float), required field >=0.0 m 9 MCD_OFFSET Double offset of composite depth for core MCD Offset # # # 12 CORE_RECOVERY Double length of recovered core Core Recovery (m) real value >=0.0 # m 13 CORE_RECOVERY_PC Double percentage of core recovery Core Recovery (%) real value >=0.0 >=0.0 % 14 CORE_ONDECK Date date and time core comes on deck On Deck core on deck, (date UTC), required field <>0 # 15 ORIENTED Text is core oriented ? true or false Core Oriented ? oriented yes or no ? IN ( 'yes','no') or is Null # 16 LAST_SECTION Integer number of last section of core Section Count section count, required, between 0 and 99 BETWEEN 0 and 99 # 17 CORE_CATCHER Text core has catcher section ? CC core catcher (yes or no ), required field IN ( 'yes','no') # 18 ANALYST Text initials of data operator / Curator Curator, (fmax. 5 chars), required field <>'' # 19 REMARKS Text additional remarks, free text Remarks # # # 20 IGSN Text IGSN IGSN text string of max. 15 characters # # ####################### Data Part ############################# EXPEDITION SITE HOLE CORE CORE_TYPE TOP_DEPTH DRILLED_LENGTH BOTTOM_DEPTH MCD_OFFSET MCD_TOP MCD_BOTTOM CORE_RECOVERY CORE_RECOVERY_PC CORE_ONDECK ORIENTED LAST_SECTION CORE_CATCHER ANALYST REMARKS IGSN 5061 1 E 1 E 113.830 3 116.830 0 113.830 116.830 3.160 105.333 18-Nov-2016 04:59 no 4 yes RG after reaming material is falling to bottom of hole and we may collect this. ICDP5061ECLE001 5061 1 E 2 E 116.830 3 119.830 0 116.830 119.830 3.420 114 18-Nov-2016 05:39 no 4 yes RG + recovery - gassy ICDP5061ECME001 5061 1 E 3 E 119.830 3 122.830 0 119.830 122.830 1.930 64.333 18-Nov-2016 07:51 no 3 yes RG Day shift starts. Casing rods underneath weakened part of barge as fail safe. May shift to 1.5m runs on depth intervals that previously had poor recovery. poor rrecovery here, but unexpected. 1C drilled this depth with full recovery... ICDP5061ECNE001 5061 1 E 4 E 122.830 3 125.830 0 122.830 125.830 3.115 103.833 18-Nov-2016 08:20 no 3 yes RG Lowest 113 looks like intact sediment. All sediment above this looks very disturbed. either chewed up by the drill or chaotic landslide deposit. Gassy indicates landslide. Some gaps/ tube not completely filled that are difficult to identify and close. ICDP5061ECOE001 5061 1 E 5 E 125.830 3 128.830 0 125.830 128.830 1.520 50.667 18-Nov-2016 08:53 no 2 yes RG Poor recovery. Other holes had good recovery in this depth interval. Suspect that something has changed with the drilling strategy that is washing away core. Driller inidcates that he sped up feed on this run, but it seems worse than previous. ICDP5061ECPE001 5061 1 E 6 E 128.830 3 131.830 0 128.830 131.830 0.375 12.500 18-Nov-2016 09:21 no 2 yes RG ICDP5061ECQE001 5061 1 E 7 E 131.830 3 134.830 0 131.830 134.830 0.245 8.167 18-Nov-2016 09:59 no 2 yes RG Broken core basket teeth, but not inverted. Unclear why recovery is so poor. ICDP5061ECRE001 5061 1 E 8 E 134.830 3 137.830 0 134.830 137.830 0.965 32.167 18-Nov-2016 10:49 no 2 yes RG ICDP5061ECSE001 5061 1 E 9 E 137.830 2 139.830 0 137.830 139.830 1.565 78.250 18-Nov-2016 11:22 no 3 yes RG Drilling 2m run to try to improve recovery. Top of this run lookes heavily disturbed. recovery just longer than 160 so we are sectioning what appears to be the most disturbed upper part of the run from the more consolidated lower section. ICDP5061ECTE001 5061 1 E 10 E 139.830 1 140.830 0 139.830 140.830 0.895 89.500 18-Nov-2016 11:50 no 2 yes RG attempting 1m run to improve recovery. Looks like only the lowest 30cm is intact core. Above this looks watery and homogenized. ICDP5061ECUE001 5061 1 E 11 E 140.830 1 141.830 0 140.830 141.830 1.225 122.500 18-Nov-2016 12:21 no 2 yes RG More recovery although the upper part of the core still looks disturbed. Difficult to see through the liner. ICDP5061ECVE001 5061 1 E 12 E 141.830 1 142.830 0 141.830 142.830 1.530 153 18-Nov-2016 12:49 no 2 yes RG Attempting 1m run again to see if recovery improves. ONly drilled 1 run but got back more of what appears to be intact core. ICDP5061ECWE001 5061 1 E 13 E 142.830 1 143.830 0 142.830 143.830 1.470 147 18-Nov-2016 13:15 no 2 yes RG Drilled 1m. Recovery looks good. ICDP5061ECXE001 5061 1 E 14 E 143.830 2 145.830 0 143.830 145.830 1.625 81.250 18-Nov-2016 13:47 no 2 yes RG 2m run. Driller was attempting 3m bu got confused about the stop mark and only ran until 50cm on the next rod, not 150cm on the next rod. ICDP5061ECYE001 5061 1 E 15 E 145.830 1.500 147.330 0 145.830 147.330 0.835 55.667 18-Nov-2016 14:34 no 2 yes RG Drilling 1.5m to get on interval for 1m offset. Paul concerned that doing 1.5m offset will cause us to have to pull back 1.5m to pull tool, which gives more chance to have sand/ gravel fall in. Despite Pauls concern the drillers drilled to 1m stickup and then pull back 2m to the last joint rather than breaking at the water swivel because it was too high. Thus instead of only pulling back 1.5 we pulled back 2m. Recovery looks poor ICDP5061ECZE001 5061 1 E 16 E 147.330 1.500 148.830 0 147.330 148.830 2.490 166 18-Nov-2016 15:10 no 3 yes RG Attempting 150 run with EXN. May try ALN next to see if we get any improvement in recovery.. Torque isi very high when trying to rotate rods when startin run, also high when pulling back at the end of the run. More recovery than drilled? unclear why...must be recor in the top of the section. High torque indicates that there is a lot of material in the hole-possible that we are just picking that back up and jamming it into the barrel. ICDP5061EC0F001 5061 1 E 18 E 151.330 1.500 152.830 0 151.330 152.830 1.730 115.333 18-Nov-2016 16:41 no 3 yes RG Steve thinks that the basket is too stiff and is shredding the core as it enters. Wants to switch to 8 to see if that improves recovery. Will try 1.5m run. Good recovery-quality looks good and recovery looks full. ICDP5061EC1F001 5061 1 E 19 E 152.830 1.500 154.330 0 152.830 154.330 1.875 125 18-Nov-2016 17:22 no 3 yes RG Attempting another 1.5m run. Recovery looks full. Massive green unit with sharp contact to tan sediment below. ICDP5061EC2F001 5061 1 E 20 E 154.330 3 157.330 0 154.330 157.330 2.120 70.667 18-Nov-2016 18:03 no 3 yes RG Torque high at beginning of run. Recoveyr not complete. Should continue with 1.5m runs and 8 baskets as long as they aren’t inverting. ICDP5061EC3F001 5061 1 E 21 E 157.330 1.500 158.830 0 157.330 158.830 1.340 89.333 18-Nov-2016 20:09 no 2 yes RG drilled 1.5 - nearly full - bottom of shoe empty - watery at top. #8 cc inverted, switch to #10. ICDP5061EC4F001 5061 1 E 22 E 158.830 1.500 160.330 0 158.830 160.330 3.330 222 18-Nov-2016 21:03 no 4 yes RG 1.5m run, 3.0+ recov. CC inverted. Look for fill up high in secs. 1 :& 2. ICDP5061EC5F001 5061 1 E 23 E 160.330 3 163.330 0 160.330 163.330 3.020 100.667 18-Nov-2016 21:44 no 3 yes RG try a 3m run. full tube with some gas expansion - laminations visible, appears primary. ICDP5061EC6F001 5061 1 E 24 E 163.330 3 166.330 0 163.330 166.330 2.565 85.500 18-Nov-2016 23:10 no 3 yes RG lightning delay - 10:30 -11. 3m run came up a little short but nicely laminated. ICDP5061EC7F001 5061 1 E 25 E 166.330 1.500 167.830 0 166.330 167.830 1.250 83.333 18-Nov-2016 23:53 no 2 yes RG drill 1.5 m to get back on offset 1.5m. ICDP5061EC8F001 5061 1 E 26 E 167.830 3 170.830 0 167.830 170.830 3.185 106.167 19-Nov-2016 00:47 no 4 no RG 3m run full recov. ICDP5061EC9F001 5061 1 E 27 E 170.830 3 173.830 0 170.830 173.830 3.375 112.500 19-Nov-2016 01:21 no 4 yes RG 3m - full recov. ICDP5061ECAF001 5061 1 E 28 E 173.830 3 176.830 0 173.830 176.830 2.590 86.333 19-Nov-2016 02:00 no 4 yes RG drilled 3 86% ICDP5061ECBF001 5061 1 E 29 E 176.830 3 179.830 0 176.830 179.830 1.630 54.333 19-Nov-2016 02:34 no 2 yes RG drilled 3m - liner shattered - 1.5m recov. Driller noted it felt like the rods dropped into a hole. Liner may have been brittle and shattered on hard latch. ICDP5061ECCF001 5061 1 E 30 E 179.830 3 182.830 0 179.830 182.830 1.955 65.167 19-Nov-2016 03:25 no 3 yes RG ICDP5061ECDF001 5061 1 E 31 E 182.830 3 185.830 0 182.830 185.830 1.925 64.167 19-Nov-2016 03:53 no 3 yes RG poor recovery again - ca. 2m sands probably. ICDP5061ECEF001 5061 1 E 33 E 188.830 3 191.830 0 188.830 191.830 2.500 83.333 19-Nov-2016 05:14 no 3 yes RG 80+5 recovery ICDP5061ECFF001 5061 1 E 34 E 191.830 3 194.830 0 191.830 194.830 2.525 84.167 19-Nov-2016 05:56 no 3 yes RG nearly full run ICDP5061ECGF001 5061 1 E 35 E 194.830 1.500 196.330 0 194.830 196.330 0.840 79.333 19-Nov-2016 07:26 no 2 yes RG Day shift begins.Drilling: Steve, Geoserve. Science: Dirk, Maarten, Jorunn, Lein, Ryan. Driller ran 1.5m run to get on joints. Will continue with 3m runs assuming good recovery. Core recovery looks ok, but quality seems low. Putting a 10 back in this tool to avoid chewing up run 37. The tool for run 36 already has been dropped and has a 12 basket. ICDP5061ECHF001 5061 1 E 36 E 196.330 1.500 197.830 0 196.330 197.830 2.023 134.867 19-Nov-2016 08:01 no 5 yes RG Extreme expansion. Drilled 1.5m but recovered>3m. Watched ~15cm (processed as section 1) expand out of the top of the liner when the tool was opened. Material looks to be entirely real with lots of breaks and cracks from expansion. Massive green mud. No sign of lamination. ICDP5061ECIF001 5061 1 E 37 E 197.830 1.500 199.330 0 197.830 199.330 1.900 126.667 19-Nov-2016 08:29 no 3 yes RG ICDP5061ECJF001 5061 1 E 38 E 199.330 1.500 200.830 0 199.330 200.830 0.690 46 19-Nov-2016 09:01 no 2 yes RG ICDP5061ECKF001 5061 1 E 39 E 200.830 1.500 202.330 0 200.830 202.330 0.750 50 19-Nov-2016 09:32 no 2 yes RG Core catcher partially inverted. Don;t suspect much lost out the bottom-only a few teeth starting to bend in. ICDP5061ECLF001 5061 1 E 40 E 202.330 1.500 203.830 0 202.330 203.830 1.555 103.667 19-Nov-2016 10:02 no 2 yes RG ICDP5061ECMF001 5061 1 E 41 E 203.830 1.500 205.330 0 203.830 205.330 2.155 143.667 19-Nov-2016 10:32 no 3 yes RG Using a 12 because run 39 partially inverted...although tune 40 was fine with a 10. Sulfur smell noticed at bottom when EXN opened. ICDP5061ECNF001 5061 1 E 42 E 205.330 1.500 206.830 0 205.330 206.830 0.220 14.667 19-Nov-2016 11:02 no 2 yes RG 1.5m run. ICDP5061ECOF001 5061 1 E 43 E 206.830 1.500 208.330 0 206.830 208.330 1.760 117.333 19-Nov-2016 11:36 no 3 yes RG ICDP5061ECPF001 5061 1 E 44 E 208.330 3 211.330 0 208.330 211.330 2.840 94.667 19-Nov-2016 12:11 no 3 yes RG Dark sand/ coarse material at base. Softer green mud with some sand above. ICDP5061ECQF001 5061 1 E 45 E 211.330 3 214.330 0 211.330 214.330 3.460 115.333 19-Nov-2016 12:59 no 6 yes RG Final core of project. begin tripping out 12:59PM. ICDP5061ECRF001