Additional Pictures
Date: 11/25/04
|
|
Hawaii Scientific Drilling Project Additional Pictures Date: 11/25/04 |
|
| THUMBNAIL | NAME | REMARKS |
|---|---|---|
|
UN_Attaching_Mill_Bit_HSDP-2b_1.jpg | Dan, Ron, and Shorty screw the mill bit onto the pipe |
|
UN_Cleaning_Bit_Threads_HSDP-2b_1.jpg | Bruce cleans the threads of the brand new mill bit with a wire brush |
|
UN_Connecting_Stiff_Pipe_HSDP-2b_1.jpg | A close up view of the junction between two lengths of the stiff pipe |
|
UN_Dan_Tightens_Bit_HSDP-2b_1.jpg | Dan begins to tighten the mill bit in place |
|
UN_Mill_Bit_Into_Hole_HSDP-2b_1.jpg | Bill guides the new mill bit into the hole |
|
UN_The_Mill_Bit_HSDP-2b_1.jpg | The mill bit stands over a foot tall, and is coated with chunks of tungsten-carbide for cutting |
|
UN_Thread_Locking_Compound_HSDP-2b_1.jpg | Bill applies a thread locking compound to the pipe and bit junctions, which acts as a welding agent |
|
UN_Tightening_Pipe_HSDP-2b_1.jpg | The drilling crew makes sure everything that goes into the hole is securely tightened |