|
THUMBNAIL
|
NAME
|
REMARKS
|
|
UN_Brent_Don_Deviation_Tool_HSDP-2b_1.jpg
|
Brent spies the camera out of the corner of his eye as Don Thomas carries the deviation tool back to the office to extract data from it
|
|
UN_Bruce_Dan_Remove_Tool_HSDP-2b_1.jpg
|
Engineer Bruce Howell and welder Dan Riley remove the downhole deviation logger from the core barrel
|
|
UN_Dan_Inserts_Deviation_Tool_HSDP-2b_1.jpg
|
Dan inserts the downhole deviation logger into the core barrel at the start of the day
|
|
UN_Used_Core_Bit_HSDP-2b_1.jpg
|
This is the core bit that we used to drill through the steel side wall of the casing and on to a depth of 9937'. It isn't in bad shape considering it isn't designed for drilling through
steel.
|